Micrometers

Measuring & Test Equipment

accuracymm

display_type

graduationmm

graduationsmm

ingress_protection_rating_ip_rating

measurement_rangemm

measuring_rangemm

product_type

resolutionmm

set_type

system_of_measurement

brand

categoryId

stockStatus

Linear Measurement Equipment

Digital External Micrometers

Oxford

Direct reading external micrometer for quick and easy reading. With enamelled frame and tungsten carbide precision ground micro finish measuring faces. 
Measuring range: 0 - 25mm. 
Graduation: 0.01mm, 0.5mm screw pitch with lock.

This mechanical manual external micrometer provides direct readings for quick and easy measuring. With an enameled frame and tungsten carbide precision ground micro finish measuring faces, the micrometer has a measuring range of 0 - 25mm.

Features and Benefits
• Measuring faces are constructed from precision ground tungsten carbide for durability
• Enameled frame
• 0.5mm screw pitch with lock
• Direct reading for quick and easy reading of measurements

Typical Applications
• Designed to measure length, diameter and thickness dimensions

Mechanical Micrometer

MECHANICAL MANUAL MICROMETER 0-25mm/0-1"

Featuring large digital display and carbide tipped measuring faces. With ball end cap for measuring curved surfaces, auto power on/off and mm/inch conversion. Ratchet stop for consistent measurement and locking device. Complete with case, spanner and battery.

Features and Benefits
• Large Digital Display: Ensures clear and easy-to-read measurements for accuracy
• Carbide-Tipped Measuring Faces: Enhances durability and maintains precision over time
• Auto Power On/Off: Increases convenience, saving energy and prolonging battery life
• MM/Inch Conversion: Offers flexibility to accommodate different measurement units
• Ratchet Stop: Provides consistent and repeatable measurements, ensuring accuracy


75-100mm/3-4" IP65 DIGITAL EXTERNAL MICROMETER

Analogue External Micrometers

With enamelled frame and tungsten carbide tipped anvils. High quality fitted metal case with adjusting spanner. Sizes 25 - 50mm/1 - 2” and over supplied with setting standard. Manufactured to BS 870. All supplied in a impact resistant fitted plastic case.

Precision is paramount with our robust enamelled framed external micrometer. Featuring tungsten carbide tipped anvils, this tool ensures high-precision measurements in diverse applications. Ideal for workshops and manufacturing, the micrometer delivers accurate and reliable results. Its sturdy construction and advanced features make it a must-have for professionals and enthusiasts who prioritize precision in their measurements. Whether measuring dimensions in intricate projects or demanding industrial settings, this external micrometer guarantees dependable performance, setting a standard for accuracy in dimensional measurement tasks.

Features & Benefits
• Enamelled frame with tungsten carbide tipped anvils for hardwearing use
• Excellent fitted metal case with adjusting spanner
• Range Size from 25 - 50mm & over supplied with setting standard
• Manufactured to BS 870 standard
• Supplied in an impact resistant fitted plastic case
• Resolution: 0.01mm
• Weight 230g

Notes
• Adjusting spanner & metal case included


Enamelled Frame External Micrometers - Metric

25-50mm EXTERNAL MICROMETER

75-100mm EXTERNAL MICROMETER

Kennedy

Enamelled frame and tungsten carbide tipped anvils. Manufactured to BS 870.
Accuracy:
Flatness: 0.6mm.
Parallelism: (2 + L/100) µm (fraction rounded down).
Instrumental error: ±(1 + L/75) µm (fraction rounded up).
L = maximum measuring length.

Enamelled frame and tungsten carbide tipped anvils. Manufactured to BS 870.
Supplied in a durable plastic case.
Flatness: 0.6mm.
Parallelism: (2 + L/100) µm 
(fraction rounded down).
Instrumental error: ±(1 + L/75) µm 
(fraction rounded up).
L = maximum measuring length

Metric External Micrometers

0-25mm EXTERNAL MICROMETER

50-75mm EXTERNAL MICROMETER

100-125mm EXTERNAL MICROMETER

125-150mm EXTERNAL MICROMETER

Micrometer Accessories

Made of cast iron, it is designed for use with most standard micrometers up to 100mm (4"). The clamp has positive angular and padded parallel clamping jaws.

Keep your hands free while operating a micrometer with this stand. Made of cast iron, it is designed to be suitable use with most standard micrometers of up to 100mm. The clamp on the stand has positive angular and padded parallel clamping jaws with 90° pivoting in the vertical plane.

Features and Benefits
• Keeps hands free whilst working
• Cast iron build
• 90° pivoting

Typical Applications
• Mass production measurements

Micrometer Stand

SMS230 Micrometer Stand

25-50mm/1-2" IP65 DIGITAL EXTERNAL MICROMETER

50-75mm/2-3" IP65 DIGITAL EXTERNAL MICROMETER

Internal Micrometers

Possessing an accuracy of 0.004mm and graduation of 0.0001mm, these 3 point metric internal micrometers are a simple, reliable and highly effective way of measuring the inner diameters of holes for precision working. Available as a set of 2 micrometers and 1 rod or 3 micrometers and 2 rods, each accessory and tool in the set is chrome plated to create a robust product.

Features and Benefits
• Measurement can be taken closer to the bottom of the blind bore, and can be taken into a deep hole with the accompanying extension rods
• Self-centering for easy and speedy working
• Chrome plated for bolstered resistance to corrosion as well as wear and tear
• Available as a set of 2 micrometers and 1 rod or 3 micrometers and 2 rods depending on your preferences and needs

Contents
• OXD3352540K:
• 1 x Micrometer 12-16mm
• 1 x Micrometer 16-20mm
• 2 x Spanners
• 1 x Calibration Ring 16mm
• 1 x Extension Rod
• 1 x Hex Key
• OXD3352550K:
• 1 x Micrometer 20-25mm
• 1 x Micrometer 25-30mm
• 1 x Micrometer 30-40mm
• 1 x Calibration Ring 40mm
• 1 x Calibration Ring 25mm
• 2 x Extension Rods
• 2 x Spanners
• 1 x Hex Key

Typical Applications
• Engineering
• Construction
• Manufacturing

3-Point Internal Micrometer Sets, Metric

12-20mm 3-POINT INTERNAL MICROMETER SET

20-40mm 3-POINT INTERNAL MICROMETER SET

Carbide tipped spindle faces. Hardened and ground anvils. Supplied in metal case with adjusting spanner. Four anvils and three setting standards. 
Accuracy: ± (4+L/75)mm.  
Measuring faces flatness: ± 0.6mm.
Parallelism: (2+L/100)mm.

Oxfords Versatile range of micrometers with interchangeable anvils with ratchet top, lock, setting standards and wooden case. Rigid and stable cast Iron frame thats perforated for lightness.

Interchangeable Anvil Micrometers

0-100mm INTERCHANGEABLE ANVIL MICROMETER

0-150mm INTERCHANGEABLE ANVIL MICROMETER

300-400mm INTERCHANGEABLE ANVIL MICROMETER

400-500mm INTERCHANGEABLE ANVIL MICROMETER

500-600mm INTERCHANGEABLE ANVIL MICROMETER

Depth Micrometers

Ideal for low-range measurements, this non-digital depth micrometer has a 63 or 100mm hardened tool steel base and satin chrome finish.  Includes a 'constant force attachment' for use when fitting the interchangeable rods and supplied in a handy case.

Fixed Rod Depth Micrometers

0-25mm FIXED ROD DEPTH MICROMETER 63mm

0-25mm FIXED ROD DEPTH MICROMETER 100mm

Used for measuring within small grooves or recesses and for quick comparisons of thread accuracy in screw cutting operations. With knurled thimble, ratchet stop and thumb lock. Enamelled frame with satin chromed finish barrel and sleeve.

Micrometers

Oxford

MECHANICAL MANUAL MICROMETER 0-25mm/0-1"

Oxford

75-100mm/3-4" IP65 DIGITAL EXTERNAL MICROMETER

3 Variations

Oxford

25-50mm EXTERNAL MICROMETER

12 Variations

Oxford

75-100mm EXTERNAL MICROMETER

12 Variations

Kennedy

0-25mm EXTERNAL MICROMETER

6 Variations

Kennedy

25-50mm EXTERNAL MICROMETER

6 Variations

Kennedy

50-75mm EXTERNAL MICROMETER

6 Variations

Kennedy

75-100mm EXTERNAL MICROMETER

6 Variations

Kennedy

100-125mm EXTERNAL MICROMETER

6 Variations

Kennedy

125-150mm EXTERNAL MICROMETER

6 Variations

Kennedy

SMS230 Micrometer Stand

Oxford

25-50mm/1-2" IP65 DIGITAL EXTERNAL MICROMETER

3 Variations

Oxford

50-75mm/2-3" IP65 DIGITAL EXTERNAL MICROMETER

3 Variations

Oxford

12-20mm 3-POINT INTERNAL MICROMETER SET

2 Variations

Oxford

20-40mm 3-POINT INTERNAL MICROMETER SET

2 Variations

Oxford

0-100mm INTERCHANGEABLE ANVIL MICROMETER

5 Variations

Oxford

0-150mm INTERCHANGEABLE ANVIL MICROMETER

5 Variations

Oxford

300-400mm INTERCHANGEABLE ANVIL MICROMETER

5 Variations

Oxford

400-500mm INTERCHANGEABLE ANVIL MICROMETER

5 Variations

Oxford

500-600mm INTERCHANGEABLE ANVIL MICROMETER

5 Variations

Oxford

0-25mm FIXED ROD DEPTH MICROMETER 63mm

2 Variations

Oxford

0-25mm FIXED ROD DEPTH MICROMETER 100mm

2 Variations

Oxford

0-25mm 30DEG POINTED MICROMETER

Oxford

0-25mm EXTERNAL MICROMETER

12 Variations

Oxford

50-75mm EXTERNAL MICROMETER

12 Variations

Key Information

Group Policies

© 2024 Cromwell. All rights reserved.